Journal of Iranian Ceramic Society
Volume 18, Issue 3 (Journal of Iranian Ceramic Society 2022)
Jicers 2022, 18(3): 68-80 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Hassan-Aghaei F, Mohebi M. Determining the Conditions of Mesoporous silica Coatings Synthesis via Evaporation Induced Self-Assembly on Glass Substrate. Jicers 2022; 18 (3) :68-80
URL: http://jicers.ir/article-1-460-en.html
URL: http://jicers.ir/article-1-460-en.html
IKIU , fa.hassanaghaei@gmail.com
Abstract: (844 Views)
Among various forms of mesoporous silica materials, mesoporous coatings are one of the most favorable in various applications such as optics, electronics, different types of sensors, corrosion protection coatings, etc. To investigate the fabrication of process and its effect on coating properties, in this study, single-layer mesoporous silica coating fabricated by Evaporation Induced Self-Assembly method and Cetrimonium bromide was used as the structure-directing agent. After preparing the stable solution and aging it for 7 days, the deposition was performed by the spin coating method and in order to remove the template, the sample was calcined for 4 hours at 450 ° C. To evaluate the fabrication conditions, the stability of the sol and surfactant removal process were studied. The sample was exhaustively characterized by low-angle X-ray diffraction and electron microscopy. The results of the tests showed a continuous and very smooth coating with a thickness of 500 nm and had an ordered structure with a pore size of 3 nm.
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |